Product Description

Dye Sublimation Endless Printing Felt

Dye Sublimation Endless Printing Felt Description

Heat transfer printing felts also called Nomex endless Felt, Calender heat press felt, sublimation heat press blanket, They are the most important component of the heat transfer printing machines which print the pattern from paper to fabric helping with pressure and temperature.

We can offer Heat transfer printing felt with original and special dimensions for every brand heat transfer printing machines and household textiles ironing machines.
Application:
Our Nomex Felt can use in those brand: Klieverik, Monti, Transmatic, Lemaire, Practix, Sorim, Studio FX, Stork, Bates, Wuppertal, Kristall, Sublistatic, Gessner, Bizmak, S.T.M., Singer, KMT, MOGK, TURAL MAKINA...

Heat Resisting Nomex Endless Needle Felt Conveyor Belt Specification

Felt Length: ≤50m
Felt Width: ≤3.8m
Felt Thickness: 4-12mm or on your requirement
Weight : 3,200g/m2 (8mm Thick)

Heat Resisting Nomex Endless Needle Felt Conveyor Belt Advantage

Feature:
1. Misaligned----Our base cloth is use endless industrial silk. Testing report showed the misaligned rate is no more than 3mm.
2. Shrinkage----The base cloth can control the shrinkage rate in 2.5%--3%.
3. Material---100% dupont Nomex,imported from Japan.

Heat Resisting Nomex Endless Needle Felt Conveyor Belt Detail Image

Heat Resisting Nomex Endless Needle Felt Conveyor Belt Packing details

Waterproof film + bubble film + woven bag + kraft paper(or as your demands)

FAQ:

When you use our pasting belt during your production,you could refer to the following solution if you have following problems:
1.The belt was scratched when the machine was running.-- please check if there is andebris in the belt or in the lead paste. (please make sure that there is no debris on

the tape.)
2.The belt slippage when the machine was running,-- please make sure that the tape is fully wet with warm water before the machine and properly adjust the elastic shaft.
3.When the machine is running, the tape is stuck.-- kindly make sure the belt

thickness is suitable for your machine, and proper adjustment of the scraper height

can alleviate the problem.
4.The belt is too hard to get on machine.--- steam it for about 5 minutes.
Once you have other problem, kindly contact us to give you the solutions.

Contact us if you need more details on Mixture Nomex And Polyester Felt. We are ready to answer your questions on packaging, logistics, certification or any other aspects about Textile Printing Endless Felt、Printing Field-Nomex Felt. If these products fail to match your need, please contact us and we would like to provide relevant information.

Product Categories : Transfer Printing Felt